Chapter 1 Getting Started
11
Protective Material
Place anti-static protective material on the work surface. A padded surface protects
equipment from scratches during installation.
Small Containers
Have several small containers (such as coffee cups) available to hold screws, washers,
and other small components once you remove them.
Foam Pad
A foam pad is useful for holding the display while attaching the touch screen. The pad
makes the screen easier to rotate for fastening screws, taping, etc.
Identifying the Components
The following components are needed for a successful integration:
•
A ClearTek™ II touch screen
•
An EX II touch screen controller
•
A serial cable (7310101) or USB cable (7312256)
•
Software and technical documentation found on the
.
Save the invoice, shipping container, and all packing material in case you need to
transport the equipment any time in the future.
Testing the Display Video
Whether you are installing the touch screen on a new or older display, you should make
sure that the display is in good working condition and the video output is functioning
properly. Your initial test should verify that the video functions properly before you
install the touch screen. You can also compare your results with the results you get after
you complete the installation.
If the display is functioning properly, turn off your system, disconnect power plugs, and
disconnect all cables from the display. You are ready to disassemble the display and
install the touch screen.
3M Touch Systems Proprietary Information
Summary of Contents for MicroTouch ClearTek II
Page 20: ......
