3M Matic 700a3, Instructions And Parts List

Page: 87 / 124

3
General Information
How to use this Manual
This instruction manual covers safety aspects, handling and transport, storage, unpacking, preparation, installa-
tion, operation, set-up and adjustments, technical and manufacturing speci
fi cations, maintenance, troubleshoot-
ing, repair work and servicing, electric diagrams, warranty information, disposal (ELV), a glossary with a de fi nition
of symbols, plus a parts list 3M Industrial Adhesives and Tapes Division 3M Center, Bldg. 220-5E-06 St. Paul, MN
55144-1000 (USA) Edition December 2011/Copyright 3M 2011. All rights reserved The manufacturer reserves the
right to change the product at any time without notice Publication © 3M 2011.
The manual is an important part of the machine; all information contained herein is intended to enable the equipment
to be maintained in perfect condition and operated safely. Ensure that the manual is available to all operators of this
equipment and the manual is kept up to date with all subsequent amendments. Should the equipment be sold or
disposed of, please ensure that the manual is passed on with the machine.
Electrical and pneumatic diagrams are included in the manual. Equipment using PLC controls and/or electronic com-
ponents will include relevant schematics or programs in the enclosure (or will be delivered separately as needed)
Keep the manual in a clean and dry place near the machine. Do not remove, tear or rewrite parts of the manual for
any reason. Use the manual without damaging it. However, if the manual has been lost or damaged, ask your after
sale service for a new copy (if it is possible, please have the manual name, part number, and revision information and/
or model/machine name, machine type, and serial number) that are located on the identi
fi cation plate (For example:
Model
200a - Accuglide 2+ - 3 inch - Type 10500 - Serial Number 13282
).
Note:
All the important warning notes related to the operation of the machine are identi fi ed by the symbol:
Updating the Manual
Modi fi cations to the machine are subject to manufacturer's internal procedures. The user may receive pages or
parts of the manual which contain amendment made after its fi rst publication. The user must use them to update this
manual.
AccuGlide
™
2+ STD 3 Inch Upper and Lower Taping Heads consist of:
Qty. Part Name
1 Taping Head Assembly
1 Tape Drum and Bracket Assembly
1 Hardware and Spare Parts Kit
1 Threading Tool
Taping Head Contents
2+ STD 3" Taping Head - NA
2011 December