3M Matic 700a3, Instructions And Parts List

Page: 28 / 124

16
2011 July
700a3-NA
6-UNPACKING
6.1 Uncrating
The envelope attached to the shipping box contains
the uncrating instructions of the machine
(Figure 6-1).
Cut straps. Cut out staple positions along the bottom
of the shipping box (or remove staples with an
appropriate tool
- Figure 6-2)
After cutting out or removing the staples, lift the
shipping box in order to clear the machine
(two persons required).
Transport the machine with a fork-lift truck to the op-
erating position. Lift the pallet at the point indicated in
Figure 6-3
(weight of m pallet = See Speci fi -
cations).
6.2 Disposal of Packaging Materials
The 700a3 package is composed of:
- Wooden pallet
- Cardboard shipping box
- Wooden supports
- Metal fi xing brackets
- PU foam protection
- PP plastic straps
- Dehydrating salts in bag
- Special bag of laminated polyester/aluminium/
Polyethylene (sea freight package only)
- Polyethylene protective material
For the disposal of the above materials, please follow
the environmental directives or the law in your country.
Figure 6-1
Figure 6-2
Figure 6-5
Figure 6-3
Removal of Pallet
Loosen and remove nuts and brackets using the
open end spanner supplied in the tool box
(Figure 6-4).
A cardboard box is located under the machine body.
Retrieve the instruction manual for additional proce-
dures of the set up. The box also contains parts re-
moved for shipping, spare parts and tools
(Figure 6-5).
Figure 6-4