background image

16

GB   English

17

GB   English

APPENDIX

Declaration – Electromagnetic Emissions

The 3M Littmann® Electronic Stethoscope, Model 3100, is intended for use in the electromagnetic environment specifi ed 
below. The customer or the user of the Model 3100 should assure that it is used in such an environment.

Emissions test

Compliance

Electromagnetic environment –guidance

RF emissions CISPR 11

Group 1

Model 3100 uses RF energy only for its internal function. 
Therefore, its RF emissions are very low and are not likely to 
cause any interference in nearby electronic equipment.

RF emissions CISPR 11

Class B

Model 3100 is suitable for use in all establishments, including 
domestic establishments and those directly connected to 
the public low-voltage power supply network that supplies 
buildings used for domestic purposes.

Harmonic emissions IEC 61000-3-2

Not applicable

Voltage fl uctuations/fl icker emissions 
IEC 61000-3-3

Not applicable

Declaration – electromagnetic immunity

The 3M Littmann® Electronic Stethoscope, Model 3100, is intended for use in the electromagnetic environment specifi ed 
below. The customer or the user of Model 3100 should assure that it is used in such an environment.

Immunity test

IEC 60601 test level

Compliance level

Electromagnetic environment –guidance

Electrostatic discharge 
(ESD) IEC 61000-4-2

± 6 kV contact
± 8 kV air

± 6 kV contact
± 8 kV air

Floors should be wood, concrete or 
ceramic tile. If fl oors are covered with 
synthetic material, the relative humidity 
should be at least 30%.

Electrical fast transient/
burst IEC 61000-4-4

± 2 kV for supply lines
± 1 kV for input/output lines

Not applicable

Surge IEC 61000-4-5

± 1 kV differential mode
± 2 kV common mode

Not applicable

Power frequency 
(50/60 Hz) magnetic 
fi eld IEC 61000-4-8

3 A/m

3 A/m

Power frequency magnetic fi elds should 
be at levels characteristic of a typical 
location in a typical commercial magnetic 
fi eld or hospital environment.

Voltage dips, short 
interruptions and 
voltage variations on 
power supply lines IEC 
61000-4-11

< 5 % UT (>95% dip in UT) for 
0.5 cycle
40 % UT (60% dip in UT) for 
5 cycle
70 % UT (30% dip in UT) for 
25 cycle
< 5% UT (>95% dip in UT) 
for 5 sec

Not applicable 

Summary of Contents for Littmann 3100




















Reviews: