3M GMI PS200-LMP, Operation & Maintenance Manual, Page: 23 / 46

64220, Rev. 1/April 2019
3M™ GMI™ PS200-LMP AUTO BUMP/CALIBRATION STATION
PERFORMING A CALIBRATION/BUMP TEST
5-3
Figure 5-5: Close Front Cover
8. Calibration will start automatically. The orange LED illuminates, indicating that calibration is in
process, as illustrated in
Figure 5-6: Calibration in Progress
. Refer to
Section APPENDIX A. SPECIFI-
CATIONS
.
Figure 5-6: Calibration in Progress
9. The monitor automatically starts and after its warm-up is complete, gas delivery commences.
10. The monitor will display both the %VOL and PPM CO gas readings.
11. The monitor's alarm indications are activated when the alarm setpoints are reached. The gas val-
ues alternate with HIHI, as illustrated in
Figure 5-7: Monitor in HIHI Alarm
.
a
Figure 5-7: Monitor in HIHI Alarm