6
Figure 5 - Connect the Emergency Descent Device to a Guide Cable (Sloped Application Only)
A
A
A
A
B
C
C
C
C
C
B
B
B
A Remove four 1/4-20 x 1-1/4 Bolts
B Position Suspension Bar
C Install four 1/4-20 x 1-1/2 Bolts, torque to 60 in lbs.
E
D
www
.capi
talsa
fety.c
om
USA
: (800
) 328
-614
6
9510
230
Rev.
A
D Capture Guide Cable in Suspension Bars with 3/8-16 x 1-3/4 bolts and 3/8-16 nylok nuts. Torque to 60 in lbs.
E Capture Descender Swivel and Guide Cable in Guide Cable Sleeve. Torque fasteners to 60 in lbs.
3.6 USE:
Check your descent path and landing area for obstructions before stepping off the structure. The device will allow
you to descend at a rapid rate.
1.
Connect Snap Hook to front D-ring.
2.
Step off structure.
3.
Keep hands free of Guide Cable Sleeve as you are descending.
4.
As you approach the landing, bend your knees and lean back slightly.
5.
After landing, disconnect from your body support. The connecting hook will retract back to the Emergency Descent
Device.
