3M Touch Systems Proprietary Information
2
ChassisTouch
TM
450 Monitor User’s Installation Guide
System requirements
The ChassisTouch 450 monitor requires a host computer that has:
!
An available RS-232 serial communication (COM) port.
!
A unique interrupt request (IRQ) available to the COM port that the
ChassisTouch 450 monitor will use. The monitor cannot share an IRQ with
another device.
!
A 9-pin to 25-pin adapter if the available serial port on the host computer has
25 pins.
!
A video card and video driver that is already installed. For instructions on
installing a video card and video driver, refer to your host computer’s
documentation or the video card manufacturer’s documentation.
Packing list
The ChassisTouch 450 monitor comes with the following items:
!
ChassisTouch 450 Monitor User’s Installation Guide
(this manual)
!
AC power cable (North American)
!
AC/DC power supply (12 VDC output)
!
RS-232 serial cable
!
SVGA video cable
!
Full scale cutout template, locknuts, and washers for mounting the monitor in
a panel
!
Floppy disks with Near Field Imaging (NFI) touch screen drivers for
Windows XP Professional and Windows 2000 Professional operating
systems.
If your system requires Windows NT, Windows 98, or Windows 95 drivers,
they are available for download from www.3Mtouch.com.
!
Floppy disk with the linearization file for your NFI touch screen. If it is ever
necessary to uninstall and reinstall the touch screen driver software, you may
need the NFI linearization file from the floppy disk
Related documents
For information on how to install and customize driver software for the
ChassisTouch 450 monitor, refer to the software guide listed below that is
appropriate for your operating system. The software guides may be downloaded
from the 3M Touch Systems web site (www.3Mtouch.com).
!
For Windows XP Professional and Windows 2000 Professional operating
systems
, refer to:
MicroTouch NFI Software Guide: For Windows XP and
Windows 2000
.
Important
The linearization file for your monitor can also be retrieved from www.3Mtouch.com. You
will be prompted to enter your NFI touch screen serial number (located on the back of the
ChassisTouch 450 monitor).