3M Calibration Kit 529-04-48 User Manual Download

Page: 3 / 3

This concludes the Filter & Regulator Panel with Carbon Monoxide Monitor
Training.

Thank you again for choosing a 3M System.

Please refer to the User Instruction Manual packaged with the product or call 3M
Technical Service at 1-800-243-4630 for more information on this product.

Summary of Contents for Calibration Kit 529-04-48

Page 1: ...onto the ZERO AIR cylinder outlet making sure not to cross thread the regulator or cylinder outlet port and tighten the regulator firmly Open the knob on the regulator counterclockwise to start gas flow f Observe the display on the monitor The reading should move to zero 00 after approximately one 1 minute If the display does NOT read zero 00 adjust the ZERO potentiometer such that the display now...

Page 2: ...he reading is stable approximately one minute compare the value indicated on the display with the value noted on the SPAN GAS cylinder If the display does NOT read the same value as noted on the SPAN GAS cylinder adjust the SPAN potentiometer until the reading indicated on the display matches the concentration of carbon monoxide printed on the SPAN GAS calibration cylinder g When these steps have ...

Page 3: ... Monoxide Monitor Training Thank you again for choosing a 3M System Please refer to the User Instruction Manual packaged with the product or call 3M Technical Service at 1 800 243 4630 for more information on this product 3M April 2007 All Rights Reserved ...

Search results

Summary of Contents for Calibration Kit 529-04-48

Reviews:

Related manuals for Calibration Kit 529-04-48

Brands by name

Popular brands

3M Calibration Kit 529-04-48, Instructions

Search results

Summary of Contents for Calibration Kit 529-04-48

Reviews:

Related manuals for Calibration Kit 529-04-48

Brands by name

Popular brands