![background image](http://html1.mh-extra.com/html/3m/c4667pw/c4667pw_user-manual_442671008.webp)
6
3M
TM
Multi-Touch Chassis Display User Guide
3M Touch Systems, Inc. Proprietary Information
Chapter 1
Setting Up Your 3M Multi-Touch Chassis
Display
To setup your display you need to complete the following tasks:
Unpack the components
Connect the video cable, touch display cables, and power cable
Power on the display and test your setup
If your operating system does not support native touch, install 3M
MicroTouch™ MT7 Software.
System Requirements
This display requires a personal computer (PC).
Your PC must have an available USB port or RS-232 serial communication
port (C3266PW only). Connect the touch sensor cable to the communications
port.
Your PC must have a video card and video driver already installed for the
display.
Note:
Before setting up your 3M Multi-Touch Chassis Display, refer to the
“Important Safety Information” section at the beginning of this document.
Unpacking Your Touch Display
Carefully unpack the carton and inspect the contents. Your 3M Multi-Touch Chassis
Display includes the following:
USB Cable
9-pin RS-232 serial cable
(Qty 2 for C3266PW only)
VGA Cable
DVI Cable
Summary of Contents for C4667PW
Page 2: ......