3M AccuGlide HST 41000, Instructions And Parts List

Page: 27 / 48

19
Spare Parts/Service Information
Recommended Spare Parts
Listed are a set of spare parts that will periodically require replacement due to normal wear. These parts should
be ordered to keep the taping heads in production:
AccuGlide™ HST 2 Inch Upper Taping Head
Qty. Part
Number Description
4 78-8076-4500-3 Stud – Mounting
2 78-8137-3563-2 Spring - Midpoint Upper
1 78-8137-3564-0 Spring - Main Upper
1 78-8017-9173-8 Blade – 65mm/2.56 Inch
2 78-8052-6602-6 Spring – Cutter
1 78-8076-4726-4 Tool – Tape Threading
AccuGlide™ HST 2 Inch Lower Taping Head
Qty. Part
Number Description
1 78-8017-9173-8 Blade – 65mm/2.56 Inch
2 78-8052-6602-6 Spring – Cutter
4 78-8076-4500-3 Stud – Mounting
2 78-8137-3565-7 Spring - Midpoint Lower
1 78-8137-3566-5 Spring - Main Lower
1 78-8076-4726-4 Tool – Tape Threading
In addition to the above set of spare parts supplied with the taping head, it is suggested that the following spare
parts be maintained which will require replacement under normal wear of the taping head.
Qty. Part Number Description
1 78-8137-3551-7 Roller – Applying
1
78-8137-3555-8 Roller – Buf fi ng
1 78-8113-7030-9 Spring – Torsion
Replacement Parts and Service
Refer to the fi rst page of this instruction manual
“Replacement Parts and Service Information".
HST 2" Taping Head - NA
February 2010