3M AccuGlide HST 39100, Instructions And Parts List

Page: 25 / 39

21
Replacement Parts And Service Information
Spare Parts
A set of spare parts that will periodically require replacement due to normal wear is supplied with the taping
heads. The set includes the following which should be reordered as consumed to keep the taping heads in
production:
HST Taping Heads (Upper and Lower)
Qty. Fig./Ref. No. Part Number Description
1 9/10 78-8070-1431-7 Blade - 2.50 Inch [64,5 mm]
In addition to the above minimum spare parts, it is suggested that the following spare parts be maintained which
will require replacement under normal wear of the taping head.
HST Taping Head (Upper and Lower)
Qty. Fig./Ref. No. Part Number Description
1 8/11 78-8057-5703-2 Spring - Latch
1 10/5 78-8015-7213-8 Spring - Torsion Inner Lower
1 10/5 78-8068-3940-9 Spring - Torsion Inner Upper
1 10/6 78-8015-7214-6 Spring - Torsion Outer Lower
1 10/6 78-8068-3941-7 Spring - Torsion Outer Upper
1 8/14 78-8062-3802-4 Finger - Tape Support
1 9/9 78-8015-7029-8 Spring - Tape Cut-off
1 8/19 78-8070-1615-5 Roller - Applying
2 10/8 78-8062-3987-3 Roller - Buffing
1 9/12 78-8070-1451-3 Felt Pad
Replacement Parts And Service
Refer to the first page of this instruction manual "Replacement Parts And Service Information".