background image

78-0013-6978-0-B

 7

2.15  Raise the element actuation button.

2.16  Pull connector from the receptacle.

3M

 No Polish ST Connectors, Kit and Tool Descriptions

Packaging

8840 No Polish Connector ST SM Plug 250/900 µm with tool (blue housing)

12 or 60/package*

6840-50 No Polish Connector ST MM 50 µm 250/900 µm with tool (black housing)

12 or 60/package*

6840-50/LOMMF No Polish Connector ST MM 50 µm 250/900 µm LOMMF with tool (aqua housing)

12 or 60/package*

6840-62.5 No Polish Connector ST MM 62.5 µm 250/900 µm with tool (beige housing)

12 or 60/package*

8865 No Polish Connector Kit

1/package

8865-C No Polish Connector Kit with Cleaver

1/package

8845-AT No Polish Connector ST Assembly Tool

1/package

*“RoHS Compliant 2002/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of the maximum concentration values in EU 

Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. This information represents 

3M’s knowledge and belief, which may be based in whole or in part on information provided by third party suppliers to 3M.

3M

 No Polish Connector Kit 8865-C with Cleaver

Kit Contents:
8865-AT No Polish SC Connector Assembly Tool 250/900 µm
8835-AT No Polish LC Connector Assembly Tool 250/900 µm
8845-AT No Polish ST Connector Assembly Tool 250/900 µm
2534 Fiber Cleaver (not included in 8865 kit)
6365-ST Stripping Tool
6365-KS Aramid Yarn Snips
Lint-Free Cloths (100/pkg)

Cleaning Alcohol Bottle

Summary of Contents for 8865-C









Reviews: