10
4.0 INSPECTION
4.1 INSPECTION
FREQUENCY:
The Hauling Kit must be inspected at the intervals de
fi
ned in Section 2.2. Inspection
procedures are described on the
“Inspection and Maintenance Log” (Table 1)
.
4.2 DEFECTS:
If inspection reveals a defective condition, is deemed unsuitable for use by a competent person or has been
involved in a fall, remove unit from service immediately and destroy.
4.2 PRODUCT
LIFE:
The functional life of Hauling Kit is determined by work conditions and maintenance. As long as the
product passes inspection criteria, it may remain in service for up to 10 years from the date of manufacture.
5.0 MAINTENANCE, SERVICING, STORAGE
5.1 CLEANING
INSTRUCTIONS:
Clean the Rollgliss Technical Rescue Hauling Kit as follows:
A) Wash Haul Kits in clean water only. Attention should be given to the locking cam and cam follower to ensure any
grit is removed and they are moving smoothly. If you need to remove grit or more stubborn dirt and grime that often
causes stiffness in the operation of the cam, a light cleaning agent such as WD40 or equivalent may be used. When
a cleaning agent is used, ensure that all remnants are washed off and that the cleaning agent does not come into
contact with the rope.
B) After washing, dry the unit with a soft cloth and hang the rope in a well ventilated area out of direct sunlight, to
allow for proper drying.
C) Inspect Riggersmate Hauling Kits as per the inspection section within this manual. If the unit fails inspection or
there is concern about its condition, return the unit to 3M Fall Protection and or their authorised service agent for
service.
D) Store dry units within their supplied bag in a clean and dry location.
5.2 AUTHORISED
SERVICE:
Additional maintenance and servicing procedures must be completed by a factory authorised
service center. Authorisation must be in writing. Do not attempt to alter the unit in any way.
5.3
STORAGE AND TRANSPORT:
Store and transport the Hauling Kit in a cool, dry, clean environment out of direct sunlight.
Avoid areas where chemical vapors may exist. Thoroughly inspect the Hauling Kit after extended storage.
6.0 LABELING:
Figures 8 and 9 illustrate product markings and labels and their location on the Hauling Kit. All markings and labels must
be present and fully legible.