4
GENERAL INSTRUCTIONS AND CARE
Inspection:
Make sure unit is straight and operates smoothly.
Make sure cable is not kinked, frayed or damaged.
Make sure metal components are not damaged.
Make sure the Hole Plug slides freely along main cable.
Make sure the label is affixed to unit and legible.
When reusing a previously drilled hole, always inspect the hole carefully.
Storage and Cleaning:
After each use clean with compressed air.
Store in clean dry environment.
Store in secure area at the end of each work day.
Do not pile objects onto or step on the unit.
Keep unit free of grout, grease, oils and dirt or other contaminates.
Never lend your unit to other workers.
Disposal:
Dispose of unit after any fall has occurred.
Dispose of unit if cable becomes kinked or bent.
Proper disposal requires the units main cable to be cut.
Follow all manufacturer’s instructions.
Use only compatible connectors.
Always inspect your units prior to use.
Use the proper method of coupling to anchorage.
Remove unit from service if a fall has occurred.
Patch all holes with concrete when job is complete.
For use by Single User only.
Pregnant women and minors must not use this product.
Designed safe working load is 400 LBS (181 kg). Do not exceed this weight.
Important Warnings
This product is to be used by trained fall protection personnel only. It is to be anchored in accordance with
manufacturer’s requirements. All persons using this equipment must read and understand all instructions.
Failure to do so may result in serious injury or death. If a fall occurs, the SafeClaw must be disposed of according
to the manufacturer instructions. Users should be familiar with regulations governing this equipment. All
individuals who use this product must be properly trained before using this device.
Use only compatible connectors with any SafeClaw . Refer to separate instructions supplied with your connecting
device.
Keep unit free of grout, grease, oils, dirt or other contaminates. This could effect the performance of the unit.