10 | 3MWTS Series Water Softeners – Installation Instructions
3MWTS Series Water Softeners – Installation Instructions | 11
Diagnostics
STEP 1:
Press or simultaneously for 3 seconds. If screen in Step 1 does not appear in 5
seconds the lock on the valve is activated. To unlock press NEXT and SET CLOCK in
sequence, then press NEXT and simultaneously for 3 seconds.
STEP 2:
This display shows the number of days since the last regeneration occurred. Press the
NEXT button. Press REGEN to exit Diagnostics.
STEP 3:
Gallons treated since last regeneration: This display shows the number of gallons that have
been treated since the last regeneration. This display will equal zero if a water meter is not
installed. Press the NEXT button. Press REGEN to return to previous step.
STEP 4:
Gallons: reserve capacity used for last 7 days: This display shows 0 day (for today) and
flashes the reserve capacity. Pressing the button show day 1 (which would be yesterday)
and flashes the reserve capacity used. Pressing the button again will show day 2 (the
day before yesterday) and reserve capacity. Keep pressing the button to show the
gallons for days 3, 4, 5 and 6. The button can be pressed to move backwards in the day
series. Press the NEXT button at any time. Press REGEN to return to previous step.
STEP 5:
Gallons, 63 day usage history: This display shows day 1 (for yesterday) and flashes the
number of gallons treated yesterday. Pressing the button will show day 2 (which would
be the day before yesterday) and flashes the number of gallons treated on that day.
Continue to press the button to show the maximum number of gallons treated for the
last 63 days. This display will show dashes if a water meter is not installed. Press the NEXT
button at any time. Press REGEN to return to previous step.
STEP 6:
Current flow rate: Turn the water on at one or more taps in the building. The flow rate
in gallons per minute will be displayed. If flow stops the value will fall to zero in a few
seconds. This display will equal zero if a water meter is not installed. Press the NEXT
button. Press REGEN to return to previous step.
STEP 7:
Maximum flow rate for last seven days: The maximum flow rate in gallons per minute that
occurred in the last seven days will be displayed. This display will equal zero if a water
meter is not installed. Press the NEXT button. Press REGEN to return to previous step.
STEP 8:
Total gallons used since last reset: The total number of gallons used since last reset will
be displayed. This display will equal zero if a water meter is not installed. Press the NEXT
button. Press REGEN to return to previous step.
STEP 9:
Total number of days since last reset: The total number of days the control valve has been
in service since last reset will be displayed. Press the NEXT button. Press REGEN to return
to previous step.
STEP 10:
Total number of regenerations since last reset: The total number of regenerations that
have occurred since last reset will be displayed. Press the NEXT button to exit Diagnostics.
Press REGEN to return to previous step. To lock settings press NEXT and SET
CLOCK in sequence.
RETURN TO
NORMAL MODE
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
Step 8
Step 9
Step 10
Summary of Contents for 3MWTS Series
Page 22: ......
