3M 3M-Matic 800a, Instruction Manual

Page: 55 / 130

43
Part Number Option/Accessory
78-8052-6553-1 Box Hold Down Attachment
78-8069-3983-7 Caster Kit Attachment
70-8069-3924-1 Conveyor Extension Attachment
78-8069-3926-6 Low Tape Sensor Kit
70-0064-4963-4 AccuGlide 3 Upper Taping Head - 2 inch, Type 10800
70-0064-4962-6 AccuGlide 3 Lower Taping Head - 2 inch, Type 10800
78-8114-0940-4 Three Flap Folder Kit
78-8095-4854-4 2 Inch Tape Edge Fold Kit (Upper)
78-8095-4855-1 2 Inch Tape Edge Fold Kit (Lower)
For additional information on the options and accessories listed below, contact your 3M Representative.
Options and Accessories
800a Adjustable Case Sealer, Type 40800
Frame Assemblies
To Order Parts:
1. Refer to fi rst illustration,
Frame Assemblies,
for the
Figure Number
that identi fi es a speci fi c portion of the
machine.
2. Refer to the appropriate
Figure or Figures
to determine the parts required and the parts reference number.
3. The Parts List that follows each illustration, includes the
Reference Number, Part Number
and
Part
Description
for the parts on that illustration.
Note –
The complete description has been included for standard fasteners and some commercially
available components. This has been done to allow obtaining these standard parts locally, if desired.
4. Order parts by Part Number, Part Description and Quantity required. Also include the model/machine name,
machine type, and serial number that are located on the identi
fi cation plate.
5. Refer to the fi rst page of this instruction manual
“Replacement Parts and Service Information”
for
replacement parts ordering information.
Important –
Not all the parts listed are normally stocked items. Some parts or assemblies shown are
available only on special order. Contact 3M/Tape Dispenser Parts to con fi rm item availability.
2011 August
800a-NA