3M 3M-Matic 800a, Instruction Manual

Page: 24 / 130

12
2011 August
800a-NA
4-SPECIFICATIONS
IMPORTANT SAFEGUARD
4.5 Tape Width
36mm [1 1/2 inch] minimum to 48mm [2 inch] maximum
4.4 Tape
Scotch
® pressure-sensitive fi lm box sealing tapes.
4.3 Operating Conditions
Use in dry, relatively clean environments at 5 o C to 50 o C [40 o F to 120 o F] with clean, dry boxes.
Note:
Machine should not be washed or subjected to conditions causing moisture condensation on
components.
•
To reduce the risk associated with f i re
and explosion hazards:
−
Do not operate this equipment in poten-
tially fl ammable or explosive environments.
WARNING
Actual production rate is dependent on operator's dexterity. Boxes must be 18 inches (457mm) apart minimum.
0
5
10
15
20
25
30
35
40
45
0 5 10 15 20 25 30 35 40
4.1 Power Requirements:
Electrical – 120 VAC, 60 Hz, 6 A
Pneumatic – 6.5 bar gauge pressure [95 PSIG], 2.5 SCFM
75 liter/minute @ 21° C., 1.01 bar maximum at maximum cycle rate.
A pressure regulator/ fi lter is included.
The machine is equipped with two 1/6 HP gearmotors and comes with an 2.4 m [8 foot] standard neoprene
covered power cord and a grounded plug. Contact your 3M Representative for power requirements not listed
above. Contact your 3M Representative for power requirements not listed above.
4.2 Operating Rate:
Belt speed is 0.5 m/s [100 F.P.M.]