3M 3M-Matic 700r3, Instructions And Parts List

Page: 24 / 144

14
2012 January
700r3-NA
4-SPECIFICATIONS
4.1 Power Requirements
Electrical: 115 Volt,60Hz, 3.8 A (440 watts)
The machine is equipped with a 2.4m [8 foot] standard neoprene covered power cord and a grounded plug.
Contact your 3M Representative for power requirements not listed above.
4.2 Operating Rate
Box drive belt speed is approximately 0.5 m/s [100 feet per minute].
IMPORTANT SAFEGUARD
4.5 Tape Width
48mm [2 inch] minimum to 76mm [3 inch] maximum
4.4 Tape
Scotch
®
pressure-sensitive fi lm box sealing tapes.
4.3 Operating Conditions
Use in dry, relatively clean environments at 5 o C to 50 o C [40 o F to 120 o F] with clean, dry boxes.
Note:
Machine should not be washed or subjected to conditions causing moisture condensation on
components.
0
5
10
15
20
25
30
35
40
45
0 5 10 15 20 25 30 35 40
Pneumatic – 5 bar gauge pressure [70 PSIG] 110 litre/min @ 21 C, 1.01 bar [3.75 SCFM] at 15 boxes per
minute A pressure regulator is included
•
To reduce the risk associated with f i re
and explosion hazards:
−
Do not operate this equipment in poten-
tially fl ammable or explosive environments.
WARNING