6
78-8135-0094-5-K
3.4.3 If securing the strength members
is not required, the front half of
the sheath retention inserts can be
removed as shown in Figure 4.
3.4.4 Slide central strength member under
retention lug and tighten bolt to 40
in-lbs ± 5 in-lbs (4.6 N•m ± 0.6 N•m).
Figure 4
3.4.5 Cut a small length of the unused
sheath scuff and place it grit side
inward inside of the hose clamp.
Note: The cut piece of sheath scuff should wrap at
least halfway around the cable sheath, but not
completely around the cable.
Place cable retention clamp and sheath
scuff onto the cable so that hose
clamp will be 1" (25 mm) from end of
sheath.
3.4.6 Install hose clamp and tighten to
40 in-lbs ± 5 in-lbs
(4.6 N•m ± 0.6 N•m).
Figure 5
3.5
For armored cables (Figure 6), use 3M
™
Scotchlok
™
Shield Bond Connector
4460-D/FO Kit.
Figure 6
Summary of Contents for 2178-XLB
Page 2: ......
Page 15: ...15 78 8135 0094 5 K ...
