manualshive.com logo in svg

3M 1000, User Manual

Share
Download
3M 1000 User Manual Download Page 82

 

1 2  3  4  5  6 

7 

8 

9 

      

Reader Configuration Tool 

 

 

70 

 

3M Compact RFID Reader 1000 User’s Guide 

 

7.4.

 

User Application Management 

This page lists any user applications currently available on the reader and if 
any applications are running. This page also allows you to upload 

applications to the reader.  
 
 
 

 

 

Running User Applications – Lists any user applications currently 
running on the reader. The application name, process ID, configuration, 
and status are provided. Controls are provided to view the application 
file and stop the application. 

 

Application Transfer – This function allows you to load custom user 
applications onto the reader.  

 

Applications available on the reader – This function allows you to view a 
list of all user applications stored on the reader. Controls are provided 
to view the application and delete it from the reader. 

 

Start Applications – This function allows you to start Python and Java 
applications. 

 

Summary of Contents for 1000


























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands