3M 1000, User Manual

Page: 60 / 121

1 2 3 4 5 6
7
8 9
Reader Configuration Tool
48 3M Compact RFID Reader 1000 User’s Guide
7.1.
Basic Configuration
With the Basic Configuration functions you can perform the following:
 Manage reader profiles

Set tag protocols
 Setup the Ethernet/LAN configuration
 Setup the serial port
 Setup digital accessories
 Setup antennas

Set regulatory modes
7.1.1.
Configuration Page Header
Each page displayed by the RCT has the following header.
This header provides pull-down menus for each of the configuration
function categories. Additional functions include the user login and the
currently loaded reader profile.
Login
The reader’s default user level is guest. However, a user can login as
admin
.
If not logged in as admin, the default level is always guest.
The guest login level provides read-only access to the reader. Clients that
login in at the guest level can read the settings of the reader and can
access the tags that the reader has inventoried. Clients at this level cannot
change the configuration of the reader.
The admin login level provides read-write access to the reader. Clients that
login in at the admin level can read and write the settings of the reader and
can access the tags that the reader has inventoried.
Logout
After logging in as admin, the Logout button logs you out of the reader.
Logging out automatically sets the login level to guest.
Profile:
Profile is the currently active profile in the reader. Refer to the Manage
Profiles section for detailed information on reader profiles.