1 2 3 4 5
6
7 8 9
Reader Startup Tool
3M Compact RFID Reader 1000 User’s Guide
33
Login to Reader
To login to the reader, perform the following:
1
From the pull-down menu, select
Reader
→
Login…
.
2
Select the type of
Login
from the pull down. The default login is
guest
. If
you need administrator privileges, login as
admin
.
3
Enter your
Password
. Enter
readeradmin
as the password if you logged
in as
admin
.
4
Press
OK
.
Select Operating Mode
From the pull-down menu, select
Operating Mode
→
<Active | Standby>
or, press the Operating Mode select button on the left side of the tool bar.
Active
–
Reader is continuously attempting to singulate tags and
automatically reports any singulated tag via an asynchronous event
notification on the event channel.
Standby
–
Reader is not transmitting any RF energy, unless processing
a tag related command. The transmitter is enabled at the beginning of
the command processing, protocol operations required for the
command are performed, and then the RF transmitter is turned off.
Summary of Contents for 1000
