Here, you can set the following functions:
1)
Siren’s hooting time
: siren’s hooting time is programmable when 3G system
alarming(00-30 minutes)
If you set 00, it will be mute alarm;
If you set over 30 minutes, the alarm system won’t stop hooting until you disarm the
system.
E.g.
by default setting
2)
Arm delay time setting
: Exit delay time setting: 00-99 seconds
E.g.
by default setting
3)
Alarm delay time setting
: Entry delay time setting: 00-99 seconds
E.g.
by default setting
4)
Recycle times incorrect
: You can set the auto dial times if no person answer the alarm
calling, optional. E.g
by default setting
5)
MMS photo size (pixles) setting:
Can choose
176*144
、
320*240
、
640*480, the high
pixle setting, the more clear MMS picture will send. E.g
by default setting
6)
Signal mode setting:
Can choose "Automatic"( It means 3G signal is in priority if there is
3G signal, when there is no 3G signal, it will automatically switch to 2G mode.) or
"WCDMA Only" 2 modes, when the 3G signal is weak,you can choose WCDMA Only to
optimize. E.g
by default setting
7)
AC power failure alarm ON/OFF
: if it’s ON, when host AC power failure, the host will
send you SMS to remind you. E.g
by default setting
8)
Siren accompany sound ON/OFF:
if it’s ON, when control the system with remote
8
