16. Formatting TF card
Input "
#9*67 + p #"
on wireless keypad, main panel will BEEP when setting is over.
Two BEEP indicate operation successful. After operating this command, the main panel will
delete all the file in TF card.
17. How to set disarm indication tone of door sensor
Start disarm indication tone of door sensor,
Input:
“ #9*17+#
”
on wireless keypad, main
panel will BEEP when operation finished. Two BEEP indicate operation successful. Enable
this function, the main panel will sound voice to indicate when door is opened in disarmed
state.
Close disarm indication tone of door sensor,
Input:
“ #9*16+#
”
on wireless keypad, main
panel will BEEP when operation finished. Two BEEP indicate operation successful.
18. Main host language setting
Set to be in English: Input
“ #9*56+p#
”
on wireless keypad, main panel will BEEP
when operation finished.Two BEEP indicate operation successful and the voice call menu and
SMS will auto switch to English.
Set to be in Chinese: Input
“ #9*55+p#
”
on wireless keypad, main panel will BEEP
when operation finished.Two BEEP indicate operation successful and the voice call menu and
SMS will auto switch to Chinese.
Chapter Six: How to operate the alarm main panel
1. Remote control operation
A. The master can lock the door and press to arm the system and then go out.
B. When master return home, he should press to disarm the system firstly, then enter the
house.
C. Any emergency happens, master can press to send out emergency alarm, siren will hoot
and main panel will auto dial alarm phone numbers whether main panel is armed or disarmed.
D. Some specific sensors can be disarmed seperately with double press key on the remote
control when the main panel is armed, it is called BYPASS.
E. Once the main panel is power on and setting ok, smoke detector and gas detector will be
in arm status all the time, no matter main panel is armed or disarmed.
2. Working steps after alarm happens:
When main host take place alarming:
1) Siren hooting
2) If TF card insert in advance, it will take 3 photos to TF card, then start recording to TF card.
3) Sending SMS to alarm SMS phone number preset, e.g.: 03 zone door sensor alarm, it will
send SMS like this:
Wireless Alarm in zone NO.03!! (Door sensor)
4) Sending one MMS picture to alarm MMS phone number preset, MMS title like this: "3G
Alarm".
5) Auto dial 1
st
group visual or voice alarm phone number.
20
