4) Set MMS phone numbers: The 3G system will send MMS with pictures to the pre-setting
MMS phone number when alarm happen. You can input the MMS phone number as
above interface show you.
After setting, please click
to save all the settings.
4.6 Click
to program wireless sensors:
This 3G alarm system can match 32pcs alarm accessories totally (PIR-Door sensor-water
detector-gas detector-smoke detector-heat detector,etc.) and up to 5pcs remote controllers.
As above interface shows you, when you program new sensors into 3G system, you should
do it like this:
choose Accessory name
choose alarm Mode
choose Zone number
Click
Trigger the wireless sensor to send a signal to 3G
system
3G system send out two BEEPs indicates programing OK.
NOTE:
1) We usually program wireless sensors as above interface shows you:
a. Remote control
Emergency mode
01
b. PIR
Bypass mode
02 (Bypass mode, then you can disarm PIR sensors seperately)
c. Door sensor
Arm mode
03
2) Check alarm accessories, showing as below:
11
