Installation
2
Drill and Attach Anchors
*If anchoring in concrete follow Steps 2a-f, if anchoring in hollow substrate follow Steps 2g-h.
if anchoring in wood follow Steps 2m-n
Drill Ø10mm hole, minimum 65mm
deep.
remove drilling debris with a blowout
bulb or with compressed air.
With screw in anchor (3-15-311A), use a
hammer to insert anchor.
b
c
a
Concrete Installation
e
f
d
place a washer under the screw head.
Torque the screw to 15 Nm.
remove screw.
5
For more information, please visit 3-form.com or call 800.726.0126
April 2018 | MAN-rTG-300-01 | rEV 002 © 2018 3form, inc. All rights reserved.
SimpleSpec 300.01
tm
Installation Manual
Ready To Go
