manualshive.com logo in svg

3e Technologies International AirGuard 3e-525C-2, User Manual, Page: 27 / 80

Share
Download
3e Technologies International AirGuard 3e-525C-2 User Manual Download Page 27

3e–525C–2 Wireless Access Point 

Chapter 2: Hardware Installation

18   

 

 

 

 

   

 

 

          29000155-001 A

3e–525C–2 Wireless Access Point 

Chapter 2: Hardware Installation

29000155-001 A 

19

LED

Description

Power

The Power indicator LED informs you when the gate-

way is on or off.  If this light is on, the gateway is on; if 

it is not on, the gateway is off. 

WAN

This light indicates the state of your connection to the 

organization's Ethernet LAN network.  When on, the 

WAN light indicates that the unit is connected to the 

network.  When the WAN light is off, the gateway does 

not have an active connection to the network.

WLAN1 Activity

This light may be steady or blinking and indicates that 

information is passing through the AP connection.

WLAN2 Activity

This light may be steady or blinking and indicates that 

information is passing through the Bridge connection.

WLAN Signal Strength

The Strength LED indicator indicates the strength of 

the Bridge connection (WLAN2).

1. LED Off: means no connection on the bridge side, or 

the signal is very weak 

2. LED blinks slowly (every 1 second): means there is a 

connection, and the signal quality is poor 

3. LED blinks fast: means there is a connection, and the 

signal quality is good 

4. LED steady on: means there is a connection, and the 

signal quality is excellent

Summary of Contents for AirGuard 3e-525C-2

















































































Reviews:

No comments