52
10.3 Pairing the Controller
1 Turn off the Solo and the controller that you want to pair, along with any other Solos and controllers nearby.
2 Power on the Solo and controller that you want to pair.
3 Wait 30 seconds for Solo and the controller to fully boot up.
4 Identify the Pair button underneath Solo. It’s a small button inside the hole labeled Pair. You’ll need to use a
paper clip, a small screwdriver, or another similar tool to push it.
Figure 10.3.1: Pair Button
5 Press the Pair button underneath Solo and hold for one second.
6 When the controller detects Solo, it prompts you to accept the pairing request as seen in the screen below. (If the
controller does not detect Solo after thirty seconds, try pressing the Pair button underneath Solo again and repeat
as needed.)
Figure 10.3.2: Detected Solo
7 Press A, then B and hold both buttons down. Once the controller vibrates, release the buttons. Within 20
seconds, the Controller displays “Solo Paired.”
Figure 10.3.3: Solo Paired
Summary of Contents for Solo S110A
Page 1: ...User Manual ...
Page 70: ......
