40
6.2.3
Cable Cam Settings
To adjust Cable Cam’s options, select the settings menu in the bottom-right corner. Automatic view lock prevents
left-stick camera control during Cable Cam. Choose Fly Counterclockwise and Fly Clockwise to customize the
direction Solo rotates between your A and B points. Select Cable Cam How-To for instructions and tips.
Figure 6.2.3.1: App - Cable Cam Settings
6.3 Orbit
Use Orbit to fly Solo along a preset circle while fixing the camera on a central target.
6.3.1
Starting Orbit
Select Orbit from the Shot List. The App displays the current radius of the orbit and shows the location of the
subject on the map. If it’s necessary to correct the subject’s position on the map, fly Solo to the desired location,
then press A on the controller to lock on to the subject. Once you set the orbit subject, the App displays a Subject
Locked confirmation. To adjust the position of the subject during Orbit, move the center point on the map.
Figure 6.3.1.1: App - Orbit Setup
6.3.2
Orbit Operation
To fly Solo along the Orbit path, tap the left and right arrows. The default cruise speed for Orbit is 2.2 mph (1 m/s).
Figure 6.3.2.1: App - Orbit Controls
Solo orbits at a constant altitude relative to its launch point, and does
not account for changes in ground level. Be aware of any elevation
changes at your location that would affect Solo. Before starting Orbit,
always ensure there is a clear path for Solo.
Summary of Contents for Solo S110A
Page 1: ...User Manual ...
Page 70: ......
