3Dlabs Workstation x1000, User Manual

Page: 8 / 59

INTRODUCTION
Welcome to 3Dlabs!
Thank you for selecting a 3Dlabs
®
Wildcat
TM
III Graphics Accelerator Card!
This User Guide is designed to provide information about Wildcat III 6210 and Wildcat III 6110 Graphics
Accelerator Cards. In addition to this guide, you are strongly encouraged to use the online help included
in the 3Dlabs driver software Help screens.
System Requirements
•
AMD Athlon, Intel
®
Pentium
®
II or greater processor
•
Microsoft Windows NT (Service Pack 5 or higher), Windows 2000 or Windows XP (32- or 64-
bit)
•
AGP Pro 50 expansion slot
•
One open PCI slot adjacent to the AGP Pro 50 slot
•
Minimum of 64 MB DRAM (operating system dependent)
•
Industry-standard, multiple-frequency monitor (VGA) or a Digital Video Interface (DVI-I)
compliant digital display device
•
3 MB of free space on the computer’s primary system disk for the video display driver software
NOTE: If you purchased your Wildcat III 6210 or Wildcat III 6110 Graphics Accelerator Card
as part of a system, it was preconfigured to operate in your system prior to
shipment. No other modifications are necessary. Also, your system’s video drivers
were installed prior to shipment and are operative when you receive the system.
No further installation or configuration is necessary unless you purchased a
customer kit or need to reinstall your video card. Store the driver delivery media
that came with your system in a safe place in case you ever need to reinstall the
drivers.
For more detailed information on the operating system, refer to Microsoft’s web site or to the printed
documentation delivered with the system.
3Dlabs Graphics Accelerator Card User's Guide 2