3Dlabs Wildcat Realizm Graphics Accelerator User's Guide
ii
©Copyright 2005 by 3Dlabs – A Creative Company
3Dlabs and Wildcat are registered trademarks, and Realizm, SuperScene, and DirectBurst are trademarks of 3Dlabs. Pentium and
Xeon are registered trademarks of Intel. OpenGL is a registered trademark of SGI. AutoCAD is a registered trademark of AutoDesk
Inc. Microsoft, Direct X, Windows 2000, and Windows XP are registered trademarks of the Microsoft Corporation. Athlon, Opteron,
and 3DNow! are registered trademarks of AMD. All other trademarks and registered trademarks are the property of their respective
holders.
Caution:
Changes or modifications to your 3Dlabs Graphics Accelerator Card not expressly approved by 3Dlabs, Inc. voids the
user’s warranty.
FCC Notice:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy. If product is not installed and used in accordance with the
instruction guide, it may cause harmful interference to radio communications; however, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
1.
Re-orient or relocate the receiving antenna.
2.
Increase the separation between the equipment and receiver.
3.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
4.
Consult 3Dlabs or an experienced radio/TV technician for assistance.
Compliance with FCC Rules requires that a shielded cable be used to connect to other equipment. This device complies with Part 15
of the FCC Rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this
device must accept any interference received, including interference that may cause undesired operation.
This Class B digital apparatus meets all the requirements of the Canadian Interference- Causing Equipment Regulations. Cet
appareil numérique de la classe B respecte toutes les exigences du Règlement sur le material brouilleur du Canada.
3Dlabs, Inc. makes no representation that the use of its products in the manner described in this publication will not infringe on
existing or future patent rights, nor do descriptions contained in this publication imply the granting of licenses to make, use, or sell
equipment or software in accordance with the description.
FOR USE ONLY WITH UL LISTED INFORMATION TECHNOLOGY EQUIPMENT (ITE) HAVING INSTRUCTIONS ON HOW TO
ADD/REMOVE ADD ON DEVICES.
Specifications subject to change without notice.
P/N 62-000012-001
Rev C
