3
Items needed for completion:
•
Masking tape.
•
Hobby knife with #11 blades.
•
Thin and medium CA. We highly recommend Mercury M5T thin and M100XF
medium formulas as well as the Mercury glue tips.
•
30 minute epoxy. Pacer Z-poxy is a long time favorite.
•
Pacer Formula 560 Canopy Glue
•
Blue Loctite.
•
Electric drill with an assortment of small drill bits.
•
Flat head and Phillips head screw drivers.
•
Standard and needle nose pliers.
•
Side cutters.
•
Metric ball driver or allen key set.
•
Sanding block and sandpaper.
•
5 x METAL GEARED servos with a minimum of 400 oz/inches of torque. MKS
or HBL 380 recommented
•
Extreme Flight aluminum servo arms: 2 x 1.5 inch arms for aileron, 2 x 2 inch
arms for elevators and 1 x 4" dual arm for the rudder.
•
2 x 12” Servo Extensions for the Ailerons.
•
1 x 12” Servo Extension for throttle or ESC
•
2 x 48” Servo Extensions for the elevator.
•
Xpwr 60cc brushless outrunner motor
•
Blazing Star Standard XL standoff kit for electric motor mounting
•
Castle Creations 160 HV ESC.
•
Receiver battery
•
2 x 6S 5000-5500 mah LiPo battery hooked up in series for 12S operation
•
Xoar 24 x 12 PJN electric prop.
•
DA-70 with mufflers if using a gas engine.
•
Blazing Star DA 70 stand off.
•
Flowmaster 17 or 24 oz. fuel tank.
•
EF 4.5" CARBON FIBER spinner with aluminum backplate.
Summary of Contents for 92 Edge 540 V2 ARF
