Mount your elevator servos inside the horizontal stabilizers as shown.
Center the servos, and slide your servo arms onto the servo output splines. Rotate the servos and arms
as necessary to access all fasteners to lock the arms in-place. Use threadlocker if indicated by the servo-
arm manufacturer. We also use a dab of silicone adhesive on the servo arm screw to lock it in place
against vibration.
Assemble the elevator pushrod as shown. The elevator pushrods are the shorter of the included
pushrods. The longer ones are for the ailerons and rudder (if rear location is used). Note that the
pushrods have one left-hand thread and one right-hand thread, so that you can adjust their length after
they are installed.
