3DHobbyShop.com
AJ Slick 89” Assembly Manual
Thank you for purchasing this 3DHobbyShop ARF RC aircraft. If you have any issues, questions,
concerns or problems during assembly, please contact our tech department at:
or 1-830-990-6978 10am-5pm Central M-F
SAFETY in Assembly
During assembly of this aircraft, you will be asked to use sharp knives, hot irons, and hobby adhesives.
Please follow all safety procedures recommended by the manufacturers of the products you use, and
always follow these important guidelines:
ALWAYS protect your eyes when working with adhesives, knives, or tools, especially power tools. Safety
glasses are the best way to protect your eyes.
ALWAYS protect your body, especially your hands and fingers when using adhesives, knives, or tools,
especially power tools. Do not cut toward exposed skin with hobby knives. Do not place hobby knives on
tables or benches where they can roll off or be knocked off.
ALWAYS have a first-aid kit handy when working with adhesives, knives, or tools, especially power tools.
ALWAYS keep hobby equipment and supplies out of the reach of children.
SAFETY in Flying
ALWAYS fly your aircraft in a safe area, away from spectators.
ALWAYS fly your aircraft in a safe manner, within your control.
NEVER fly too close to yourself.
ALWAYS wear eye protection while operating your model aircraft.
ALWAYS keep your hands and body clear of propellers.
ALWAYS observe lipoly battery safety procedures.
ALWAYS handle gasoline in a safe manner.
ALWAYS perform a ground test and range check of your radio system before flying.
REQUIRED ITEMS
Drill and drill bits
30 Minute Epoxy Glue (
NOT
5-minute Epoxy)
Hobby Knife
Phillips Screwdriver
Set Metric Allen Wrenches
Small Pliers
Wire Cutters
Rubbing Alcohol
Paper Towels
Blue Loctite thread-locking adhesive
Dremel-type rotary tool
Small adjustable wrench or wrench set
