the hopper is not mounted correctly on the machine,
the filter screen is not installed correctly
the shredder compartment is not closed correctly
the interlock guard is not closed,
the motor temperature has been too high,
the motor current has been too high,
the switch on the power entry module is “O’’
the power cable is not plugged in
It is advised to empty the granulator compartment before starting the
machine.
9.
Reverse button (white):
Hold the Reverse button for one second to start the machine in reverse.
Note that the machine first has to be shut down using the Stop button if
the machine was already rotating. When the machine is running in
reverse, the granulator shaft is deactivated since the granulator is only
effective in the forward direction. The button will emit white light. This
reverse feature is to be used for two reasons:
To get a new grab on difficult shapes of materials
To free the shredder blades from the material if it gets stuck.
To roughly clean out the shredder compartment from big chunks
around the shredder shaft.
The same starting conditions as on the Start button apply to the Reverse
button.
