3D Systems VIDAR AdvantagePRO Series, User Manual

Page: 26 / 50

19196-001 Rev. D VIDAR Advantage Series User’s Guide 26
Slide in digitizer base
Slide in digitizer base
Slot in lamp
cartridge
Slot in lamp
cartridge
Bulb
Cartridge
7. Insert the lamp cartridge into the
digitizer base:
 The diffuser must face the rear of the
digitizer base.
 The end of the lamp cartridge with
the white connector goes in first.
 Ensure the slots along the top and
bottom of the cartridge align with
the slides in the digitizer (see
illustration at right).
 When the cartridge is nearly all the way in, push it firmly until you feel the
connector snap into place.
Slide cartridge in... then push to seat connector
8.
Re-install the lamp cartridge clamp assembly if removed earlier.
Diffuser