3D Histech Pannoramic MIDI User Manual Download Page 81

Page: 81 / 127

Pannoramic MIDI 1.18 User’s Guide

4 Software Description

Multi Filter Change Mode

This is for a multi-channel digitization. To optimize speed, filter change should take place

after the digitization of the slide with one channel.

Filters should be changed for each field of view if very precise colocalization is required, but

consider that this option is more time consuming.

•

Change filters after whole slide scan

•

Change filters at each field of view

Note

Make sure to select the

Change filters at each field of view

option

if using multi band filter for multi-channel digitization.

Digital Slide destination

This field determines where to digitize the virtual slides.

•

Select the

Scan to CaseCenter

function to scan slides directly to a dedicated

CaseCenter server.

For information on how to use the ScanToServer application, see section

7 Scan

To Server

•

If you enable the

Directory

function, the virtual slides will be digitized in the

specified folder. You can browse for the folder with the

Browse

button. If you

specify a folder that does not exist, the software creates it.

All parameter inputs are saved for the next software session.

April 3, 2014 - Rev 1

3DHISTECH Ltd.

81(127)

Summary of Contents for Pannoramic MIDI
































































































































Search results

Summary of Contents for Pannoramic MIDI

Reviews:

3D Histech Pannoramic MIDI, User Manual, Page: 81 / 127

Search results

Summary of Contents for Pannoramic MIDI

Reviews: