39
Place an M2 wheel stop collar over the top of the nose gear leg and secure the collar with
17mm protruding out the top. The grub screw should also be aligned with the neutral forward
position of the gear leg. Then insert the leg into the slot.
40
Press an M2 wheel stop collar into the nose gear steering arm and fit the assembly over the
nose gear leg. Secure the collars in place with the grub screws. The leg should be able to
rotate freely with no or very little vertical play.
(removing the cowling from the fuse will
make securing the top collar easier)
Ensure the steering arm is perpendicular to the nose wheel. This will ensure the same angle
of travel left and right is possible.