4-4
z
The console cable is properly connected; the terminal (for example, a PC) used for configuration
has been started; the configuration parameters have been set.
Powering on the Access Controller
After the access controller is powered on, the system first initializes memory. After the initiation, the
system runs the extended BootWare, and the following information is displayed on the terminal:
System is starting...
Booting Normal Extend BootWare....
The Extend BootWare is self-decompressing..................
Done!
**************************************************************************
* *
* H3C WX5004 BootWare, Version 1.01 *
* *
**************************************************************************
Copyright (c) 2004-2008 Hangzhou H3C Technologies Co., Ltd.
Compiled Date : May 19 2008
CPU Type : XLR716
CPU L1 Cache : 32KB
CPU Clock Speed : 800MHz
Memory Type : DDR2 SDRAM
Memory Size : 1024MB
Memory Speed : 533MHz
BootWare Size : 512KB
Flash Size : 4MB
cfa0 Size : 259MB
CPLD Version : 1.00
PCB Version : Ver.A
BootWare Validating...
Press Ctrl+B to enter extended boot menu...
Press
Ctrl+B
to enter the extended boot menu; otherwise, the system will start loading and
decompressing the application file.
