xii
Appendix D Connecting to the AP
To connect to the AP, you must first determine the AP’s IP address in one of these
ways.
Approved Channels
Use of this product is only authorized for the channels approved by each country. For
proper installation, select your country from the country-selection list.
To conform to FCC and other country restrictions, your product may be limited in the
channels that are available. If other channels are permitted your country, please visit
the web site for the latest software version. The Appendix B list the Software
Downloads information.
Finding the IP Address on Networks with a DHCP Server(FIT AP)
If your network has a DHCP server, it automatically assigns an IP address to the AP.
Finding the IP Address on Networks Without a DHCP Server(FAT
AP)
If your network does not have a DHCP server, the AP uses a default factory
configuration which includes the following information.
Configure the IP address of the AP as 192.168.0.50.
Configure the AP to enable the Telnet server function (the default
authentication username is
admin
, password is
password
, case
sensitive). You can remotely manage and maintain the AP through
Telnet.
Log into the AP
To Log into the AP after you determine its IP address, follows these steps:
1) Connect the AP and PC, and ensure that the PC and AP can communicate
with each other properly.
2) Launch your PC’s web browser. In the address bar, enter your AP’s IP
address and press
Enter.
3) At the AP Login Screen, type the user name and password, and the
verification code, select the language (English and Chinese are supported at
present), and click
Login
. The default username and password are
case-sensitive:
