3Com VCX V7122 SIP, User Manual

Page: 114 / 176

114
3Com VCX V7122/SIP VoIP Gateway User Manual
Figure 45
Advanced Configuration
2
To display the active configuration of a section and its relevant parameters; click an
option in the sub-menu bar on the top (Network Settings or Channel Settings).
Network Settings
To set network settings, follow these steps:
1
On the sub-menu bar on the top, click Network Settings . The Network Settings screen
opens.
2
In the Network Settings screen, you can enter or modify the following information
ƒ IP settings, including the Gateway IP address and subnet mask
ƒ Logging settings, such as the IP address of the SysLog server. If the SysLog server
is disabled, the logging data is sent to the Gateway’s serial RS-232 port
ƒ SNMP settings
ƒ RTP settings, including RTP base UDP port and IP TOS and Precedence QOS
parameters
ƒ Ethernet LAN Status (monitor only)
3
At the bottom of the screen, click Submit . The screen is refreshed.