3Com VCX V7111, Installation Manual, Page: 53 / 58

3Com VCX V7111 Fast Track Installation Guide 53
ƒ Click
Reset
; the device resets, utilizing the new
cmp
and
ini
file you loaded up to now
as well as utilizing the other configuration files.
ƒ Click
Back
; the ‘Load a
cmp
file’ screen is reverted to; see Figure 25.
ƒ Click
Next
; the ‘Load a CPT File’ screen opens, see Figure 28; Loading a new CPT
file or any other auxiliary file listed in the Wizard is optional.
Figure 28
Load a CPT File Screen
7
Follow the same procedure you followed when loading the
ini
file (see Step 6). The same
procedure applies to the ‘Load a VP file’ (not applicable to the VCX V7111 gateway)
screen and ‘Load a coefficient file’ screen.
8
In the ‘FINISH’ screen (see Figure 29 on page 54), the
Next
button is disabled. Complete
the upgrade process by clicking
Reset
or
Cancel
.
Button Result
Reset The device ‘burns’ the newly loaded files to flash memory. The ‘Burning files to flash
memory’ screen appears. Wait for the ‘burn’ to finish. When it finishes, the ‘End Process’
screen appears displaying the burned configuration files (see Figure 30).
Cancel The device resets, utilizing the files previously stored in flash memory. (Note that these
are NOT the files you loaded in the previous Wizard steps).