3Com VCX V7111, Installation Manual, Page: 17 / 58

3Com VCX V7111 Fast Track Installation Guide 17
Figure 4
VCX V7111 24FXS with Brackets for Rack Installation
Mounting the 2, 4, or 8 Port VCX V7111 on a Wall
The 2, 4, or 8 port VCX V7111 is mounted on a wall by the addition of two short (equal-
length) supplied brackets. The VCX V7111 2FXS with brackets for wall mount is shown in
Figure 5 on page 18.
To mount a 2, 4, or 8 port VCX V7111 on a wall, follow these steps:
1
Remove the screw on the side of the device that is nearest the bottom and the front
panel.
2
Insert the peg on the bracket into the third air vent down on the column of air vents
nearest the front panel.
3
Swivel the bracket so that the side of the bracket is aligned with the base of the device
and the hole in the bracket line up with the empty screw hole.
4
Attach the bracket using one of the screws provided in the device package.
5
Repeat steps 1 to 4 to attach the second bracket to the other side of the device.
6
Position the device on the wall with the base of the device next to the wall.
7
Use four screws to attach the device to the wall. These screws are not provided with the
device.