7-4
C
HAPTER
7: C
ONFIGURING
D
YNAMIC
A
CCESS
C
LASS OF
S
ERVICE
Figure 7-2
Initial Class of Service Additional Ranges Screen
2 Enter the beginning of the port or socket range for
the application in the Range Start box.
The range start should be a hexadecimal value with a
maximum of four digits.
3 Enter the inclusive range end value of the port
or socket range for the application in the
Range End box.
The range end should be a hexadecimal number with a
maximum of four digits. If only one port or socket is
needed, Range End should match Range Start.
4 Select the protocol that the application uses.
This can be TCP, UDP, or IPX. Some applications support
multiple protocols and have port or socket ranges for
each protocol. In this case, the range or protocol must
match the protocol on the PC.
