2-6
C
HAPTER
2: I
NSTALLING
THE
3C319 NIC
■
If you installed the 3C319 NIC in a PC running
Windows 95 with PnP, it will be configured
automatically when you install the driver. See
Chapter 4
,
“Installing a Network Driver for
Windows 95
.”
After installing the NDIS 4 driver for Windows 95, you
have the option to enable DynamicAccess Class of
Service support for the 3C319 NIC. See
Chapter 7
,
“Configuring DynamicAccess Class of Service
.”
■
If you installed the 3C319 NIC in a PC running
Windows NT, disable PnP before installing the driver.
See
Chapter 5
,
“Configuring the NIC Manually,”
for
instructions on disabling PnP. For Windows NT driver
installation instructions, see
Chapter 6
,
“Installing a
Network Driver for Windows NT.”
After installing the NDIS 4 driver for Windows NT, you
have the option to enable DynamicAccess Class of
Service support for the 3C319 NIC. See
Chapter 7
,
“Configuring DynamicAccess Class of Service.”
■
If you installed the 3C319 NIC in a PC running
Windows for Workgroups with PnP, disable PnP before
installing the driver. See
Chapter 5
,
“Configuring the
NIC Manually,”
for instructions on disabling PnP.
For Windows for Workgroups driver installation
information, see
“Installing a Driver for Windows for
Workgroups”
in
Chapter 8
.
■
If you installed the 3C319 NIC in a PC without PnP, or
installed the NIC in a PC with a BIOS that does not
have a utility to recognize and configure PnP-enabled
devices, you must manually configure the NIC before
installing the driver. See
Chapter 5
,
“Configuring the
NIC Manually,”
and then see
Chapter 8
,
“Manually
Installing Miscellaneous Network Drivers.”
Table 2-2
summarizes the installation procedures for
supported network environments.
