Installing the NDIS 4 Driver for Windows 95
4-5
2 In the My Computer group, double-click the
Control Panel
icon.
3 In the Control Panel group, double-click the
Network
icon.
4 In the Network dialog box, click
Add
.
5 In the Select Network Component Type dialog box,
double-click
Adapter
.
6 In the Select Network Adapters dialog box, click
Have Disk
.
7 Insert
TokenDisk
diskette #2 in the floppy drive.
8 In the Copy Manufacturer’s Files From selection
box, type:
a:\
9 Click
OK.
10 In the Models selection box, select the correct
mode (either ISA or EISA).
■
Select
3Com TokenLink Velocity ISA 3C319
if you
installed the NIC in an ISA slot. You can also make this
selection if the NIC is in an EISA slot as long as you
have not enabled the AutoSwitch option. (For more
information about enabling the AutoSwitch option,
see instructions in the section
“Other Configuration
Options
” in
Chapter 5
.)
■
Select
3Com TokenLink Velocity ISA 3C319 in EISA
mode
only if you installed the NIC in an EISA slot
and used the EISA configuration utility to configure
the NIC.
In a Compaq EISA-based PC, with PnP enabled on the
NIC, you are asked to run the EISA configuration utility.
Refer to the instructions that accompanied the PC
for details.
11 Click
OK
.
12 In the Network dialog box, click
OK
.
13 On the Resources screen, click
OK
to accept the I/O
base address.
