![background image](http://html1.mh-extra.com/html/3com/superstack-ii/superstack-ii_manual_440691057.webp)
Configuring the Current Switch
57
Hardware Rev
Displays the version number of the Switch hardware.
MAC Address
Displays the MAC (Ethernet) address assigned to the Switch.
Software Version
Displays the version number of the management software currently
installed on the Switch. For information about how to upgrade the
management software, see
“Upgrading Management Software”
on
page 89
.
Boot PROM Version
Displays the version of Boot PROM software installed on the Switch.
Product Number
Displays the 3Com product number of the unit.
TFTP Server (optionally displayed)
Displays the IP address of the last TFTP server used to upgrade the unit’s
management software.
Filename
(optionally displayed)
Displays the name of the management software file that was used during
the last software upgrade attempt.
Software Upgrade Status (optionally displayed)
Displays the reason for a software upgrade failure.
Unit Uptime
Displays the time that has elapsed since the Switch was last reset,
initialized or powered-up.
Summary of Contents for SuperStack II
