3Com SUPERSTACK 3 4500 Quick Reference Manual Download Page 17

Page: 17 / 22

Table 12

RADIUS Server Group View

[4500]

radius scheme 1

quit

Terminate the connection with the SFTP server and
return to user view

remove

Remove a file on the SFTP server

rename

Rename a file on the SFTP server

rmdir

Delete a specified directory from the SFTP server

Command

Description

Web Command

accounting optional

Enable the selection of RADIUS accounting option

data-flow-format

Configure the unit of data flow that send to
RADIUS Server

key

Configure encryption key for RADIUS
authentication/authorization or accounting packet

Security -> RADIUS Client

nas-ip

Set the source IP address of the network access
server (NAS, i.e: the Switch), so that all packets
destined for the RADIUS server carry the same
source IP address

primary accounting

Configure the IP address and port number for the
primary accounting server

primary authentication

Configure the IP address and port number for the
primary RADIUS authentication/authorization

retry

Configure retransmission times of RADIUS request
packet

retry realtime-accounting

Configure the maximum times of real-time
accounting request failing to be responded

retry stop-accounting

Configure the maximal retransmission times after
stopping accounting request

secondary accounting

Configure the IP address and port number for the
second RADIUS accounting server

secondary authentication

Configure the IP address and port number for the
second RADIUS authentication/authorization

Security -> RADIUS Client

server-type

Configure the supported RADIUS server types

state

Configure the state of RADIUS server

stop-accounting-buffer enable

Configure to save the stopping accounting requests
without response in the Switch system buffer

timer

Configure RADIUS server response timer

timer quiet

Specify the wait time for re-activating primary server

timer realtime-accounting

Configure the real-time accounting interval

timer response-timeout

Configure the RADIUS server response timer

user-name-format

Configure the username format sent to RADIUS
server

DQA1756-1AAA01.fm Page 17 Tuesday, September 13, 2005 10:08 PM

Summary of Contents for SUPERSTACK 3 4500























Search results

Summary of Contents for SUPERSTACK 3 4500

Reviews:

Related manuals for SUPERSTACK 3 4500

Brands by name

Popular brands

3Com SUPERSTACK 3 4500, Quick Reference Manual

Search results

Summary of Contents for SUPERSTACK 3 4500

Reviews:

Related manuals for SUPERSTACK 3 4500

Brands by name

Popular brands