2
■
The
undo
command is placed before the command you wish to undo, for example,
undo set
authentication
password.
■
<CTRL A> places the cursor back to the start of the command line.
■
Enter the first few characters of a command and press TAB to enter the full command without
having to input the entire command (where there is only one command that starts with the
entered characters).
■
Use the Up Arrow key at the prompt to repeat the previous command string.
■
Use the Delete key to delete the character after the cursor; the Backspace key deletes the charac-
ter before the cursor.
■
When entering physical port numbers, Enter the port number as
x/0/z
, where x is the unit
number and z is the physical port number.
Further Information
For further information about how to use the command line interface, refer to the Command
Reference Guide and the Configuration Guide, which are both available as PDF documents on the
CD that accompanied the unit.
Menus
This section provides a summary of menus and commands supported by the agent for each of the
supported hardware platform variants. Any matching web commands available in the web interface
are also shown.
Commands marked with ‘*’ are available on the Switch 4500 PWR only.
Table 1
Command Line Editing
Table 2
Commands Available in Any View
<Ctrl+A>
Moves the cursor to the start of the command line
<Tab>
Command completion
Command
Description
Web Command
?
Help
display
Display current system information
display acl
View detailed configuration information about the
ACL
display am
View the status of access management function
display arp
View the ARP mapping table
display arp timer aging
View the current setting of the dynamic ARP map
aging timer
display boot-loader
View the APP file used for this boot and the one
that will be used at next boot
display channel
View details about the information channel
display clock
View the date and time
display config-agent
View statistics of the configuration agent
DQA1756-1AAA01.fm Page 2 Tuesday, September 13, 2005 10:08 PM
