background image

R

EGULATORY

 N

OTICES

FCC S

TATEMENT

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to 
part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful 
interference when the equipment is operated in a commercial environment. This equipment generates, uses 
and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, 
may cause harmful interference to radio communications. Operation of this equipment in a residential area is 
likely to cause harmful interference to radio communications, in which case the user will be required to 
correct the interference at their own expense.

I

NFORMATION

 T

O

 T

HE

 U

SER

If this equipment does cause interference to radio or television reception, which can be determined by 
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of 
the following measures:

Reorient the receiving antenna.

Relocate the equipment with respect to the receiver.

Move the equipment away from the receiver.

Plug the equipment into a different outlet so that equipment and receiver are on different branch circuits.

If necessary, the user should consult the dealer or an experienced radio/television technician for additional 
suggestions. The user may find the following booklet prepared by the Federal Communications Commission 
helpful:

How to Identify and Resolve Radio-TV Interference Problems

This booklet is available from the U.S. Government Printing Office, Washington, DC 20402, Stock No. 
004-000-00345-4.

In order to meet FCC emissions limits, this equipment must be used only with cables which comply with IEEE 
802.3.

CSA S

TATEMENT

This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment 
Regulations.

Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur le matériel brouilleur 
du Canada.

CE S

TATEMENTS

 (E

UROPE

)

This product complies with the European Low Voltage Directive 73/23/EEC and EMC Directive 89/336/EEC as 
amended by European Directive 93/68/EEC.

Warning: This is a class A product. In a domestic environment this product may cause radio interference in 
which case the user may be required to take adequate measures.

You must only insert a 3Com approved SFP transceiver into the Switch. These are listed in the "Approved SFP 
Transceivers" section of the Getting Started Guide.

VCCI S

TATEMENT

DUA1745-0AAA02.book  Page 75  Monday, August 9, 2004  11:51 AM

Summary of Contents for SUPERSTACK 3 3870 Series













































































Reviews: